FAG 6007-Z-C3 Single Row Ball Bearings

Designation of bearing:UC207G2; B:42.9 mm; A:34 mm; Recommended tightening torque for set screw:11.5 Nm; L:90 mm; A1:14 mm; d:35 mm; C0:15.2 kN; s1:21.45 mm; G:M6x1;

Dynamic load, C:61.3 kN; Radial clearance class:C3; Ca min:5.43 mm; rNs min:0.5 mm; Brand:SNR; f:2.41 mm; d1:64.7 mm; Fatigue limit load, Cu:1.74 kN; Characteristic outer ring frequency, BPF0:3.07 Hz; Mass:1.07 kg;

N:12mm; T min.:-40 °C; Designation of open end cover:SCO203-17; Recommended tightening torque for set screw:3.5 Nm; A2:31 mm; Z:36.8 mm; G:M6x1; d:17 mm; L:57 mm; A1:11 mm;

A:36 mm; C:25.7 kN; Weight:1.47 kg; G:R1/8"; Recommended tightening torque for set screw:8 Nm; A2:44.5 mm; d:36.51 mm; S:8.5 mm; e:21 mm; N:14mm;

N:29mm; Designation of open end cover:SCO210-50; Z:74.6 mm; A1:16 mm; s1:25.2 mm; A2:37 mm; N2:49 mm; d1:70 mm; Designation of housing:T210N-; L:149 mm;

H2:57 mm; C0:4.78 kN; G:M6x1; T max.:200 °C; S:6.5 mm; N1:19 mm; T min.:-20 °C; C:9.55 kN; B1:28.6 mm; A1:18 mm;

J:118 mm; G:R1/8"; N:M16; Designation of bearing:EX212G2; T max.:100 °C; H1:16 mm; T min.:-20 °C; C:52.5 kN; H:69.9 mm; Z:112.5 mm;

C:25.7 kN; s1:36.3 mm; S:18.8 mm; A:21 mm; L:274 mm; T max.:100 °C; H:98 mm; Recommended tightening torque for set screw:8 Nm; L1:225 mm; Designation of bearing:EX207-23G2L4;

m:6.5 mm; C1:6.2 mm; d1:58 mm; D:80 mm; Recommended tightening torque for set screw:8 Nm; B2:18.3 mm; r:1.1; G:5/16-24UNF; Weight:0.68 kg; C0:18.2 kN;

rs min:0.6 mm; d:15 mm; D:35 mm; Fatigue limit load, Cu:0.17 kN; B:14 mm; Mass:0.06 kg; Brand:SNR; D1:30.5 mm; Nlim:14,000 rpm; Characteristic inner ring frequency, BPFI:4.95 Hz;

Base to Center Hight Numeric:5.2500 in; Liner Type:WATER COOLED REPLACE; Housing Material:Cast Iron; Liner Bore Type:CYLINDERICAL BORE TY; Brand:Baldor-Dodge; Seal Size:3.4375 in; Seal Type:Sleevoil Seal Carrie; Pillow Block:STD PL-WATER COOLED; Ship Weight:146 LB; UPC:782477022395;

Ball Material:Steel; Flinger Material:Steel; UPC:782475880553; d:2.1875 in; Bearing Duty:Normal Duty; Bearing Inner Ring Material:Steel; Ball Bearing Housing Series:212 Series; Retainer Material:Nylon; Bearing Locking Device:Tapered Adapter Slee; Housing Material:Cast Iron;

Z:63.3 mm; C:33 kN; Designation of bearing:LK210G2H; e:28 mm; Designation of housing:FE210N-; Dz:100 mm; d1:70 mm; Designation of open end cover:SCO210-50; A:44 mm; A2:53.2 mm;

B:68.2 mm; Z:46.5 mm; H:258 mm; T min.:-20 °C; e:30 mm; A2:81.6 mm; A:50 mm; G:M6x1; L:155 mm; Designation of bearing:EX213G2L3;

Shaft Attachment (2):Grip Tight; Bearing Inner Ring Material:Steel; Bearing Locking Device:Tapered Adapter Slee; Bearing Duty:Normal Duty; Bearing Bore Shape:Round; Ball Material:Steel; Ring Size:Standard; Ship Weight:5.47 LB; d:1.5000 in; Housing Type:2 Bolt Pillow Block;