Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds,Good radial load capacity,Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

FAG 6206-MA-C3 Single Row Ball Bearings

9 mm 25,000 rpm
0.031 5.1 kN

20 mm x 47 mm x 14 mm FAG 6204-C Single Row Ball Bearings

> C5 0.44 Hz
28 mm 2 mm

FAG 6203-C-TVH-C3 Single Row Ball Bearings

Piloted Flange Yes
Eccentric Collar 207 Series

FAG 61844-C3 Single Row Ball Bearings

C3 0.25 kN
15 mm 13 mm

FAG 6204-C-TVH-C3 Single Row Ball Bearings

M6x1 0.38 kg
20 mm 11 mm

15 mm x 28 mm x 7 mm FAG 61902 Single Row Ball Bearings

100 °C 19 mm
34 mm -40 °C

FAG 607-Z Single Row Ball Bearings

63.8 mm FC212-
160 mm 135

7 mm x 19 mm x 6 mm FAG 607 Single Row Ball Bearings

Yes Standard
Powder Coat 2.55 LB

FAG 6213-C3 Single Row Ball Bearings

125 mm 117 mm
5,100 rpm 5.9 Hz

FAG 6213-2Z-C4 Single Row Ball Bearings

0.3 mm C3
8 mm 7 mm

NTN TMB316ZC3 Single Row Ball Bearings

29 mm 25.4 mm
32.8 kN FA212N-
1/11